![]() ![]() ![]() General Information Compression Release ValvesĪll Ultima® Shovelhead engines are supplied with manually operated push button compression release valves. All charging systems are available through Midwest Motorcycle Supply. You will also have to replace the engine main seal, MW# 95-805. If you use a higher output 38, 40 or 44 amp system you must change the spacer to that system’s specific spacer or the Stator Rotor will contact the crankcase. ![]() This spacer was used on most 19 through 32 amp-charging systems supplied on Shovelhead® and Evolution® engines (except 1995 & later FLT®). Ultima® engines are supplied with MW part #98-360 main seal spacer for use with 32 amp charging systems. When using oil coolers in cold temperatures, either install a thermostat or a cover to insure the oil temperature makes it to a minimum operating temperature of 180˚F. When choosing an oil cooler, it is best to choose one that is finned & forward mounted on the frame. Ultima recommends oil coolers in applications where heavy loads are pulled or ambient temperatures exceed 90˚F or oil temps exceed 240˚F.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |